For today’s modern musicians and sound engineers, the Sterling MX8 Powered Studio Monitors deliver top-class audio quality and features.
With dual-axis WaveGuidanceVH™ technology each bi-amped monitor is built for optimal wider-and-higher frequency dispersion, giving you clear, articulate sound even when listening off-axis.
A proprietary multi-fiber 8” low-frequency driver cone offers superior damping to minimize sonic artifacts and unnatural resonance, and a 1” silk dome tweeter powered by neodymium magnets give the MX8 monitors a smooth and natural frequency response.
The result achieves best-in-class efficiency and ultra-low distortion even when mixing audio with challenging content. With an elegant polished ebony finish and blue, backlit Sterling logo, these MX monitors look as good as they sound in any studio environment.
• 8” Low frequency driver with proprietary cone design
• 4-Layer voice coil provides greater motor force for outstanding low-frequency performance
• 1” Silk dome tweeter features lightweight neodymium magnets
• 125 Watts of high-efficiency, low-distortion Class A/B amplification
• Bi-amp Class A/B design ensures superior transient response and natural bass presence
• Unique dual-axis WaveGuidanceVH™ technology and rear panel port
• High and low filters to custom tune monitors to your listening preference and environment
• Polished ebony front baffle with Sterling LED iconography
• Studio grade internal components with protective electrical design
• Professional balanced XLR, 1/4” TRS inputs and unbalanced RCA inputs
For today’s modern musicians and sound engineers, the Sterling MX8 Powered Studio Monitors deliver top-class audio quality and features.
With dual-axis WaveGuidanceVH™ technology each bi-amped monitor is built for optimal wider-and-higher frequency dispersion, giving you clear, articulate sound even when listening off-axis.
A proprietary multi-fiber 8” low-frequency driver cone offers superior damping to minimize sonic artifacts and unnatural resonance, and a 1” silk dome tweeter powered by neodymium magnets give the MX8 monitors a smooth and natural frequency response.
The result achieves best-in-class efficiency and ultra-low distortion even when mixing audio with challenging content. With an elegant polished ebony finish and blue, backlit Sterling logo, these MX monitors look as good as they sound in any studio environment.
• 8” Low frequency driver with proprietary cone design
• 4-Layer voice coil provides greater motor force for outstanding low-frequency performance
• 1” Silk dome tweeter features lightweight neodymium magnets
• 125 Watts of high-efficiency, low-distortion Class A/B amplification
• Bi-amp Class A/B design ensures superior transient response and natural bass presence
• Unique dual-axis WaveGuidanceVH™ technology and rear panel port
• High and low filters to custom tune monitors to your listening preference and environment
• Polished ebony front baffle with Sterling LED iconography
• Studio grade internal components with protective electrical design
• Professional balanced XLR, 1/4” TRS inputs and unbalanced RCA inputs
AMPLIFIER
Frequency Response: 37 Hz-22 kHz
Power Output: Tweeter 45W@ 0.5%THD-5KHz
Woofer 80W@ 0.7%THD-1KHz
Sensitivity: 650mV@1KHz to rated power
Signal Noise Ratio with A-Weight: 85dB
Total Harmonic Distortion: 0.2%@ 1W-1KHz
Crossover Frequency: 2.0KHz
CONTROL
Power Switch: Rocker
Level: Rotary VR
Input: XLR (balanced)
RCA X 1 (unbalanced)
1/4" TRS (balanced)
Setting: High Filter: –2dB, 0, +2dB@ 10Khz
Low Filter: –3dB, 0, +3dB@ 75Hz
ENCLOSURE
Dimension: W 10.32" x H 15.55" X D 12.20"
Weight: 34.17 lbs.
Material: MDF box with plastic front
Acoustic Mode: Vented box
Tweeter: 1” / 8 ohm
Tweeter Magnetic Type: Neodymium
Woofer: 8” / 4ohm
Woofer Magnetic Type: Ferrite
MAINS POWER
Line Voltage: 115VAC/60Hz +/- 10%
Fuse: T3.15A/250V
Line Cord Receptacle: IEC320 C14
AMPLIFIER
Frequency Response: 37 Hz-22 kHz
Power Output: Tweeter 45W@ 0.5%THD-5KHz
Woofer 80W@ 0.7%THD-1KHz
Sensitivity: 650mV@1KHz to rated power
Signal Noise Ratio with A-Weight: 85dB
Total Harmonic Distortion: 0.2%@ 1W-1KHz
Crossover Frequency: 2.0KHz
CONTROL
Power Switch: Rocker
Level: Rotary VR
Input: XLR (balanced)
RCA X 1 (unbalanced)
1/4" TRS (balanced)
Setting: High Filter: –2dB, 0, +2dB@ 10Khz
Low Filter: –3dB, 0, +3dB@ 75Hz
ENCLOSURE
Dimension: W 10.32" x H 15.55" X D 12.20"
Weight: 34.17 lbs.
Material: MDF box with plastic front
Acoustic Mode: Vented box
Tweeter: 1” / 8 ohm
Tweeter Magnetic Type: Neodymium
Woofer: 8” / 4ohm
Woofer Magnetic Type: Ferrite
MAINS POWER
Line Voltage: 115VAC/60Hz +/- 10%
Fuse: T3.15A/250V
Line Cord Receptacle: IEC320 C14
